Honeywell T9 Replacement: What to Buy (2026)

Honeywell Home has discontinued the T9. The official product page now says it is no longer available for sale. If yours died, or you can't find a new one, I wouldn't hunt leftover T9 or T10+ stock. I'd buy a current model instead.
If I wanted to stay in the Honeywell Home setup, I'd look at the Honeywell Home X8S. It's Honeywell's current DIY smart thermostat with optional room sensors, Matter, and a 5-inch screen. I like that path if I already have a C-wire, or I'm willing to use Honeywell's adapter.
Honeywell's T9 page does not itself name the X8S as the official replacement. It is still the current Honeywell Home model that covers the same job for most homes.
If I wanted a sensor in the box and an easier path without a C-wire, I'd look at the ecobee Smart Thermostat Premium or the Nest Learning Thermostat (4th Gen). If I just wanted something simpler and less expensive, I'd look at the ecobee Essential, or the Sensi Touch 2 if I already have a C-wire.
You can see all four brand reviews on my reviews page. And if your T9 is still working, I'd leave it on the wall. Discontinued is not the same as dead.
Cut power before you swap
Typical US thermostat circuits are low-voltage 24V, but I still cut HVAC power at the switch or the breaker before I pull a thermostat off the wall or land any wires. If you see thick high-voltage conductors, or you have electric baseboard heat, stop. These models are not for 120–240V baseboard systems. Unsure about odd wiring, a heat pump with a gas furnace, or a communicating system? Hire an HVAC tech.
How the picks compare
List prices below are official brand figures I checked on November 14, 2026. Check Amazon for today's price. I don't use static Amazon prices.
Model | List price | C-wire | Sensor in the box | I'd pick it if… | Skip it if… |
About $239.99 on Honeywell Home | Required. Honeywell's installer guide mentions a voucher for a THP9045A adapter. | Not in the Amazon listing I use (white, no-sensor style). Optional XRSENSOR packs, up to 20. Some Honeywell kits include one sensor — check the box. | You want to stay with Honeywell Home, a large screen, Matter, and optional room sensors. | You need a dual-fuel setup (heat pump plus a gas furnace). Honeywell's installer compatibility list does not mention dual fuel. Also skip if you assumed your old T9 sensors will definitely pair. | |
About $259.99 on ecobee.com | Hardwired. A Power Extender Kit is included for many homes without a C-wire. | Yes, one SmartSensor. | You want room-by-room comfort, air-quality monitoring, and built-in Alexa or Siri, and you like that the PEK ships in the box. ecobee lists dual-fuel heat pumps as supported. | You want the cheapest option, or you don't need the sensor, air-quality monitor, or built-in voice. | |
About $279.99 on the Google Store, with one sensor | Google says a C-wire is not required in most homes (Power Sharing). | Yes, one Nest Temperature Sensor (2nd gen). You can add more, up to 6 per thermostat. | You use Google Home, you want Matter, and you like that a sensor ships in the box. | You don't want a Google Account, or you have a dual-fuel system and haven't checked Google's compatibility tool. I did not see dual fuel called out on the Store page I fetched. | |
MSRP about $209.99 on Sensi's site | Required for all systems, per Sensi's comparison table. This is not the Sensi model that often skips a C-wire. | No. Optional Sensi room sensors are sold separately. | You want a simpler touchscreen, optional sensors later, and Alexa, Google Home, or SmartThings. | You don't have a C-wire. Officially it also does not list Apple HomeKit or Matter. | |
About $139.99 on ecobee.com | Hardwired. The Power Extender Kit is sold separately (about $24.99 on ecobee.com). | No. SmartSensors are sold separately. | You want a basic ecobee with app control and a schedule, at a lower list price. | You need a sensor or PEK in the box, or you have a more complex multi-stage system. Essential has tighter stage limits than Premium. Check ecobee's compatibility checker. |
Honeywell Home X8S, if you want to stay with Honeywell
The X8S is the closest current Honeywell Home thermostat to what the T9 was trying to be: a DIY unit with optional room sensors, scheduling, and app control. I like it if you already know the Honeywell Home / Resideo app world, or you want the bigger 5-inch screen, Matter, indoor air-quality readouts, and — on X8S models — a live view from a compatible First Alert VX1 or Ring doorbell. The doorbell is sold separately.
Power is the first thing to check. The official product page and installer guide both say a C-wire is required. The installer guide says you can use a THP9045A C-wire adapter if you don't have a spare wire, and that a voucher for a free adapter is included in the box. If you don't want to deal with that, I'd look at ecobee or Nest instead. I wrote more about adapters in No C-Wire? Smart Thermostats That Still Work (2026).
Don't assume your T9 sensors will move over. Resideo's X8S FAQ says the sensors made for the X8S are the XRSENSOR packs, and you can use up to 20. If you already own T9 RCHTSENSOR units, Resideo says you can try pairing them, but older ones will not work, and they do not recommend buying used T9 sensors hoping they will. T10+ sensors (C7189R3002) are listed as compatible. Standard T10 sensors (C7189R2002) are not.
The Amazon link I use is the white, no-sensor style (the live X8S review notes ASIN B0FJMS8KCF). If you need room-by-room control, plan on adding an XRSENSOR.
I would not pick the X8S for a dual-fuel system (heat pump with a gas or oil furnace as backup) unless Resideo's wiring checker or an HVAC tech says it fits. The official installer compatibility page lists heat pumps with electric backup heat. It does not list dual fuel. There's also a mismatch to be careful about: the marketing product page lists higher stage counts than the installer specifications page. I'd trust the installer docs and the compatibility checker, not the marketing table.
ecobee Smart Thermostat Premium, if you want a sensor in the box
If the thing I liked about the T9 was the room sensor, the ecobee Premium is the pick I'd look at first outside Honeywell. It includes one SmartSensor in the box, plus a Power Extender Kit for many homes without a C-wire. It also has built-in occupancy sensing, an air-quality monitor, and Alexa or Siri built into the thermostat.
ecobee's product page lists conventional 2H/2C systems, heat pumps with auxiliary heat, boilers, and dual-fuel heat pumps. That's the main reason I'd point a dual-fuel home here, or to a compatibility check on Nest, rather than assuming the X8S will do it.
I would not buy Premium if you only want a schedule and phone control. That's a lot of thermostat. The Essential covers that job for less, and I already compared those two in ecobee Essential vs Premium: Which to Buy (2026).
List price is about $259.99 on ecobee.com (check Amazon for today's price). ecobee also publishes an "up to 26%" heating and cooling savings figure from an April 2021 internal analysis, compared with a hold of 72°F. That's their claim, with fine print. It is not a typical result I can promise for your house.
Nest Learning Thermostat (4th Gen), if you use Google Home
I like the Nest Learning Thermostat (4th Gen) if you're already in Google Home and you want the thermostat to learn a schedule for you. The Google Store bundle includes one Nest Temperature Sensor (2nd gen). You can add more, up to six per thermostat. It's Matter-certified, so you can also use it in other Matter apps. Setup and day-to-day control go through the Google Home app, and you need a Google Account.
Google says a C-wire is not required in most homes because of Power Sharing. "Most homes" is not "every home," so I'd still check Google's compatibility tool, especially on a heat pump or an older system.
The Amazon listing I use is the 4th Gen bundled with the Nest Temperature Sensor. List price is about $279.99 on the Google Store (check Amazon for today's price).
I would not pick Nest if you don't want to use a Google Account, or if you need a feature I couldn't confirm on the official page — including dual-fuel support, which I did not see spelled out on the Store page. Check the compatibility tool before you buy.
Cheaper options: ecobee Essential or Sensi Touch 2
If I were replacing a T9 on a tighter budget and I didn't need a sensor in the box, I'd look at the ecobee Smart Thermostat Essential first. List price is about $139.99 on ecobee.com (check Amazon for today's price). You get app control, a schedule, and Alexa, Google Assistant, and Apple HomeKit. What you don't get is a sensor or a Power Extender Kit in the box. The PEK is sold separately for about $24.99 on ecobee.com. Essential also supports a narrower set of HVAC stages than Premium, so run the compatibility checker.
The Sensi Touch 2 is the other simpler pick I like, with a list / MSRP of about $209.99 on Sensi's site (check Amazon for today's price). It can use optional Sensi room sensors, and it works with Alexa, Google Home, and SmartThings. Two things to know up front: Sensi says a C-wire is required for all Touch 2 systems, and the official comparison table does not list Apple HomeKit or Matter. If you don't have a C-wire, this is the wrong Sensi. The Sensi smart / ST55 model is the one Sensi says does not need a C-wire for most conventional systems — that's a different thermostat, and I cover the wiring question in the no C-wire post.
I would not buy the Touch 2 if you were counting on HomeKit, or if you don't want to run a C-wire.
Should you replace a T9 that's still working?
No. If your T9 still heats and cools the way you want, and the app still connects, I'd keep it. Honeywell discontinuing the product does not mean a unit already on your wall stops working. I'd only replace it if it's failing, you can't get a replacement, or you want features the T9 never had, like Matter or a different sensor system.
The T10+ is not a plan B I'd count on either. Honeywell Home's T10+ page also says the product is discontinued and no longer available for sale.
FAQ
Will my T9 room sensors work with the X8S?
Maybe, but I wouldn't count on it. Resideo's official X8S FAQ says you can try pairing existing T9 RCHTSENSOR units, older ones will not work, and you should not buy used T9 sensors hoping they will. For a new install, I'd buy XRSENSOR packs made for the X8S. T10+ C7189R3002 sensors are listed as compatible; standard T10 C7189R2002 sensors are not.
I don't have a C-wire. What should I buy?
I would not start with the X8S or the Sensi Touch 2 unless I'm ready to add Honeywell's adapter or run a C-wire. I'd look at the ecobee Premium (PEK included) or the Nest 4th Gen (Power Sharing in most homes). The ecobee Essential can also work without a C-wire, but you have to add the PEK yourself. More detail is in my no C-wire guide.
I have a heat pump with a gas furnace (dual fuel). Which one?
I would not assume the X8S fits. Honeywell's installer compatibility page lists heat pumps with electric backup, not dual fuel. ecobee's Premium and Essential pages both list dual-fuel heat pumps, with tighter stage limits on Essential. For Nest, check Google's compatibility tool — I didn't see dual fuel named on the Store page. When in doubt, use the brand checker or hire a tech, and cut power at the switch or breaker before you look at the wires.
Do I need to replace a T9 that still works?
No. Leave it on the wall until it doesn't.
As an Amazon Associate I earn from qualifying purchases.


Comments